The main points for long-term storage of jaw crushers

For jaw crushers, normal use generally does not cause any major problems, but in cases of long-term disuse, it can more or less affect performance, especially in cases of improper storage. Therefore, it is very necessary to understand the precautions for storing jaw crushers.

First is the site: When storing jaw crushers, they must be kept in a dry indoor environment with suitable temperature. Since they include components such batteries, they absolutely cannot be placed in an open-air environment. After placing them, cover the surface of the jaw crusher with a layer of cloth to prevent the tank from rusting and to avoid performance degradation due to dust accumulation on its surface.

Next is the removal of the battery: For jaw crushers that are not used for a long time, the battery needs to be removed. Otherwise the electrolyte may corrode the equipment, which will greatly affect the life of the battery. Before removing the battery, make sure to drain the cooling water from engine, otherwise, the battery may get wet, and there might be a short circuit during the removal and installation. At the same time, it should be noted even if the jaw crusher is not frequently used, it should be charged regularly to ensure the normal use of the machine equipment.

In addition, there is touch-up painting: Touch-up painting should be carried out according to the actual situation. Some metal parts exposed to the will fade and rust over time, so it is necessary to apply a layer of butter on their surfaces, which can isolate the outside air and avoid chemical reactions., for machines that have been used for a long time and have some paint on their surfaces, overall or partial touch-up painting work should be carried out

Finally, regular lubrication is required. During the storage period of the jaw crusher, the equipment needs to be cleaned and lubricated at intervals. dirt on the surface of the equipment should be cleaned to ensure the smoothness and cleanliness of the equipment, and also to ensure that the mechanical equipment can be put operation at any time.