How to effectively prevent the crusher jammed machine

Crushers in the use of the process, there is a card machine phenomenon is common, to the customer caused time and economic losses, then how to effectively prevent Crushers card machine?

1. If the lubricating oil is not up to the standard, too much, too little and dirty deterioration of the lubricating oil will affect the lubricating effect of the equipment, thereby reducing the rotating speed of the equipment, causing the crushing effect of the equipment to be reduced, and materials to pile up inside the crushing chamber, not easy to discharge, so there is a phenomenon of blockage.

2, wearing parts, resulting in material crushing particle size is too large, in the screening process will appear the phenomenon of poor cutting, it is easy to cause the crusher plug.

3, feed speed is too fast, crusher too late crusher. If the feed is not uniform in the process of crushing and the speed is too fast, the material in the crushing cavity can not be discharged in time, which will cause serious blockage of the equipment.

4, the outlet is not smooth, crusher generally installed higher, under the conveyor, there will be some material fell under the conveyor, if the conveyor under the material accumulation more, will seriously affect the normal discharge crusher.

5, the screen under the crusher rusting, clogging and other problems, resulting in slow discharge, resulting in crusher clogging.

6, voltage instability, equipment in the crushing, voltage instability, crusher can not reach the normal speed, so it is easy to cause equipment jam.

7, the material is too big, the broken material is too big, causes the equipment each component wear to be more serious, the time is long will appear the clogging phenomenon, once the crusher appears the clogging phenomenon, will affect the future use, affect the work efficiency, so in the usual use, must pay attention to the use of methods to ensure that the equipment can be used normally.

To sum up, when the situation occurs, to immediately stop feeding, cut off the power supply, find out the cause of blockage, to solve.