How to improve working efficiency and reduce crusher loss?

Crusher wear, resulting in increased costs, it is not conducive to work efficiency,  crusher manufacturers to answer for You: How to improve work efficiency, reduce crusher loss? Crusher is heavy equipment, long-term use will inevitably occur some problems, is wear. Wear is the gradual destruction of the material surface, the separation of particles, the transfer of particles to the adjacent parts, as well as the change of mechanical properties and geometric shape of the material layer near the surface. Crusher operation, sometimes vibration, this time will produce wear. Because of the particularity of its using environment, if the machine breaks down, we need to find and deal with it in time, which is of great significance to prevent production accident and equipment damage.

1, we need to check whether the crusher wear is serious. If not serious, you can scratch to reduce wear. Otherwise, it is necessary to replace the worn parts in time to make the operation of the lithotripter more stable. Secondly, crusher vibration and trembling. Some vibrations are normal during normal operation, but if the vibration is severe, check to see if the machine is level. If not, check whether the feed is uniform, resulting in crushing difficulties, vibration. Or parts of the damage, resulting in abnormal operation of the machine. 2, after all, crusher is a large equipment, all day breaking large hard stone, wear and tear failure, is normal, so please check carefully and properly maintain it. For example, can add lubricating oil, reduce the friction generated by a large number of heat, crushing equipment has a certain protective effect. 3, crusher can start feeding after normal operation. After the material should be evenly into the crushing chamber, to avoid side loading or stacking loading, to prevent unilateral overload or bearing overload. Under normal conditions, bearing temperature rise shall not exceed 35, higher temperature shall not exceed 70. If it exceeds 70, stop immediately and find the cause to eliminate it. 4, before the shutdown, should first stop the feed work, to be broken cavity of the broken debris completely discharged, before the motor can be closed. When comminution, if the material in comminution chamber is blocked, the motor should be turned off immediately and the material should be cleaned before starting again. After one end of the tooth plate is worn, the adjustable head can be used. Summary, do the above 4 steps, can help you to solve the common crusher loss problem, I hope to help you.